خانه محصولاتفویل مس با پوشش قلع

CIC Copper Invar Copper for printed circuit board industry , Alloy Foils

CIC Copper Invar Copper for printed circuit board industry , Alloy Foils

CIC Copper Invar Copper for printed circuit board industry ,  Alloy Foils

جزئیات محصول:

Place of Origin: CHINA
نام تجاری: Civen
گواهی: SGS , CTI, ISO 9001
Model Number: MGP-C025001

پرداخت:

Minimum Order Quantity: 1000 kg
قیمت: To be Adjusted
Packaging Details: wooden case packing
Delivery Time: 2 month
Payment Terms: T/T, L/C
Supply Ability: 550 Ton per Month
اکنون تماس بگیرید
توضیحات محصول جزئیات
Product Name: CIC Material: Copper & Invar Alloy
Craft: Cladding Thickness: 0.035mm
Width: 600mm Density: 8.33g/cm³

CIC ( Copper - Invar™ - Copper )  With Maximum Width Of 600mm

 

 

Description : 

 

Copper Invar Copper was introduced into the printed circuit board industry to combat the differing coefficient of thermal expansion encountered when bonding very dissimilar materials together.

In high temperature environments Copper Invar Copper is sometimes use to strengthen the printed circuit board and control expansion.

 

Copper Invar Copper is a layer of invar which is a nickel containing iron alloy sandwiched in between two layers of copper.Copper Invar Copper is readily available in two thicknesses.

 

CIC foil is used for printed circuit boards with ground and power planes and metal cores. The low CTE(coefficient of thermal expansion)over a broad temperature range (-55℃-125℃) is crucial for aerospace and some special fields.

 

Invar is a nickel iron alloy with ca. 1/3 nickel and 2/3 iron. Its coefficient of thermal expansion CTE is about 1.5 ppm/K. Implementation of CIC layers (copper-invar-copper-composite metal) into multilayer PCBs is used to contol in plane expansion (CTExy).

 

Thermal stress at higher thermal cycles leads to fatigue and fraction of solder joints.

Ceramic semiconductor components like leadless ceramic chip-carrier (LCCC) are used for high reliable electronics. Differences of CTE of the components of ca. 6-8 ppm/K im Bauteil versus ca. 16 ppm/K of the PCB substrate lead to damages at the solder joint if no CIC is applied.

 

The bigger the BGA the more carefully has to be planned the stack-up.

 

Normally two symmetrically Cu-Invar-Cu Layers of 0.15 mm thickness each are arranged directly beneath the external layers. Cu-lnvar-Cu layer can be connected electrically, but it is not recommended to use it as power planes due to its impact on drills. On the other hand, CIC can be used for heat spreading like power planes. Heat is spreaded by the copper share ot CIC. Invar does not play a significant roll in this view, because the thermal conductivity is only 3% compared to copper.

 

Structure:

 

Material

Thickness (%)

Cu | FeNi36 | Cu

12.5% | 75% | 12.5%

 

Features :

 

Density: 8.33g/cm³

Thermal conductivity: 1.10(xy plane);0.19(z plane)W cm/cm²℃

Electrical conductivity: 14.5 m/Ω mm² (20℃,soft annealed)

Electrical Resistivity: 0.069 m/Ω mm² (20℃,soft annealed)

Modulus of Elasticity: 140000 N/mm²

CTE(Coefficient of thermal expansion): 2.4 to 5.6 ppm/℃  annealed condition longitudinal

 

Specification:

 

Item

Unit

Size

Thickness

mm

0.035

0.05

0.075

>0.1

Width

mm

1-600

1-600

1-600

1-600

Thickness tolerance

 

±10%

±10%

±10%

±10%

Width tolerance

mm

±1.0

±1.0

±1.0

±1.0

 

Application

 

CIC Copper Invar Copper for printed circuit board industry ,  Alloy Foils

 

Why Choose Civen As Your Supplier :

 

  1.   We are the most experienced copper manufacturer in China since 1998 ;We have many 
  2.  Many important customer in China and oversea markets like: Samsung(Korea), LG(Korea), Matsushita(China), BYD, and so on. 
  3.  We awarded a lot of certificates in this field such as CTI, SGS, ISO 9001, and etc. 
  4.  We have inventory for many regular size in Shanghai , and we can send goods out as soon as possible.    

اطلاعات تماس
Civen Metal Material(Shanghai) Co.,Ltd

تماس با شخص: Mr. Duearwin Moon

ارسال درخواست خود را به طور مستقیم به ما (0 / 3000)

سایر محصولات